Whether you're a teen or an adult, Coastline Academy is here to help you pass your Texas driving test with ease. Skip the long wait times at the DPS and take your road test with a state-certified instructor you can trust at our Richmond location.

Road Test Session
A state-certified instructor will administer your road test in our car.

Road Skills Test Prep + Test
Get the prep you need with a DPS-certified examiner, and then take your road skills test, all in one session.

Teen Road Test Requirements (16-17 years old)

Before scheduling your test, make sure you have:

A valid Learner's License (held for at least 6 months) and be at least 16 years old.

A DE-964 Form marked "FOR DRIVER'S LICENSE ONLY" copy, showing completion of 32 hours of classroom completion and 14 hours of behind the wheel training.

An Impact Texas Teen Drivers certificate. Complete the free video course here.

Adult Road Test Requirements (18 years and older)

Before your test, ensure you meet the following requirements:

An ADE-1317 certificate from a 6-hour adult driver's education course.

An Impact Texas Adult Drivers certificate. Complete the free video course here.

Your vehicle must have front and rear license plates.

Announcing Coastline Road Testing in Richmond 

Whether you're a teen or an adult, Coastline Academy is here to help you pass your Texas driving test with ease. Skip the long wait times at the DPS and take your road test with a state-certified instructor you can trust at our Mansfield location.

Announcing Coastline Road Testing in Mansfield

If you have completed all the requirements needed when applying for a driver's license in Wisconsin, then the final step would be taking (and passing) the behind-the-wheel driving test to get your Wisconsin drivers license. This is the big one and you may be nervous, as you are so excited to get your license. Being fully prepared will help you to pass that road test, as you can go into it being confident and calm during your test. So, what do they test during the behind-the-wheel driving test in Wisconsin? We have the details below!

Get Your Vehicle Ready For Pre-Drive Inspection

The final step before getting your driver's license in Wisconsin would be either taking a road test or applying for a road test waiver (if eligible). If you are taking the road test, you want to make sure the vehicle you are using for the test is ready. The examiner will be inspecting the following items and they must be present and in safe operating condition:

Defroster (if needed for conditions during the road test)

Windshield wipers (if needed for conditions during the road test)

If your vehicle does not meet all of these requirements, the examiner will not allow you to take the driving test. If everything looks good, it is time to begin the actual road test.

One of the biggest aspects of the road test will be how well you control the vehicle. The examiner is going to pay close attention to it and make sure you are able to perform these basic tasks smoothly and without hesitation. The road test in Wisconsin will assess your ability to safely operate a vehicle and comply with traffic laws. The examiner will likely evaluate your ability to perform the following tasks during the test:

Starting the vehicle and moving safely in traffic

Turning, including left and right turns, as well as U-turns

The road test will usually last around 20 minutes. Keep in mind, if you change lanes or turn without signaling then you will almost certainly fail your road test on the spot.

If you passed the test, you will go back to the DMV office and complete the application, pay the necessary fees and get a driving receipt, which you will be able to drive with. Your actual Probationary License will arrive by mail within 10 days.

If you failed, no need to worry. Not everyone passes on their first attempt. The examiner will give you the results of the road test and a skills test guide to use for additional practice. You should practice your driving skills, especially the parts of the test you were not successful in. You will be able to schedule another road test after the minimum wait time, which is based on the results of your failed test (1-14 days). The online system will calculate your waiting period and show you all available appointments.

As always, if you have any questions or concerns, please reach out to our friendly support staff. If you want to start your driver's training journey with Coastline Academy, make sure to sign up for Drivers Ed and book your driving lesson today.

There is a lot of criteria the Wisconsin DMV tests during the behind-the-wheel drive test and we show that criteria here.

If you are heading out for the behind-the-wheel drive test in Wisconsin, find out what you will be tested on here.

What Do They Test During Behind-The-Wheel Driving Test In Wisconsin?

You have completed all the steps needed in order to apply for your drivers license in Missouri. All of your behind-the-wheel driving instruction is complete and it is time to head to the Missouri DOR office and take your behind-the-wheel test and get your driver's license.

You may be wondering what do they test you on driving test in Missouri. We outline that for you here, so get the Missouri behind-the-wheel test details below.

Behind-The-Wheel Test Missouri: Vehicle Ready

After you pass the written, vision, and road sign tests, you may then take the driving test. You will take the driving test with a driver license examiner of the Missouri State Highway Patrol.

The examiner will check your vehicle for the required equipment. The examiner will also check your vehicle is in safe operating condition. You cannot take the test if the vehicle is not properly equipped, or the examiner believes that giving the test will be dangerous.

You should take the test in a vehicle that is familiar to you. The vehicle must have:

Current license plate(s) and a valid inspection sticker

Doors in proper working order for the driver and examiner

Two sets of brakes (parking and a foot brake) in good working order

You will drive, and the examiner will sit beside you. No one else may ride in the vehicle during the test. Avoid unnecessary conversation with the examiner, and focus on your driving. Remember the examiner’s job is to test, not to teach. You must obey all Missouri traffic laws at all times.

Behind-The-Wheel Test Missouri: Vehicle Controls

When getting in the vehicle, the examiner is going to ask you to find and use certain vehicle controls. This includes the brakes, accelerator, turn signals, windshield wipers, etc. During this, you will be tested for:

Behind-The-Wheel Test Missouri: The Driving Begins

After those steps are complete, the examiner will now ask you to start driving. During this process, you will be tested for:

Driving smoothly and at the correct speed

While you are on the road, the examiner will tell you where to drive, turn, stop, etc. After the examiner tells you what to do, you will have enough time to look for traffic and to drive as asked. You will be asked to do the following:

Start and stop the vehicle - You will be tested for the smoothness and safety of your starts and stops; your reaction time; your control of the vehicle when stopping.

Park parallel to the curb, in a space 25 feet long and 7 feet wide - You will be tested for the position of your vehicle before backing; whether or not you bump into the space markers; moving into the space smoothly and at the right speed; parking no more than 18” from the curb; parking near the center of the space; ability to park the vehicle within two minutes; turning the wheels in the correct direction for parking; checking traffic and signaling before you leave the parking space.

Backing - You will be tested for looking over your right shoulder to see through the rear glass; whether your vehicle backs in a straight line or weaves; staying in the proper lane of traffic; backing at the right speed.

Make at least two right and two left turns - You will be tested for driving in the correct lane for turning; giving the proper turn signal at the proper time; turning into the proper lane; making proper traffic checks; turning at the right speed; your control of the vehicle.

Park on a hill - You will be tested for your control of the vehicle; parking no more than 18” from the curb; leaving your vehicle in park or the correct gear; turning the front wheels in the correct direction for parking; setting the parking brake; checking traffic and signaling.

Enter and leave intersections - You will be tested for understanding and obeying the traffic signs and lights; your speed when approaching an intersection; your awareness of the traffic around you; driving in the correct lane; yielding the right-of-way without blocking traffic; making a full stop at the proper place at stop signs.

Understand and obey traffic signs and signals - You will be tested for noticing and obeying traffic signs and signals.

Behind-The-Wheel Test Missouri: Good Driving Rules

During your DOR behind-the-wheel driving test, the examiner will be watching for your use of good driving rules. You will be tested for:

The distance between your vehicle and the vehicle in front of you

Driving in the proper lane and obeying lane markings

Behind-The-Wheel DOR Test: Points Needed To Pass

Throughout the driving test, the examiner will subtract points for any driving errors you make. If you lose more than 30 points, you will fail the test. You will also fail the test if you:

Are in a crash with another vehicle and it is your fault

Drive so dangerously you might have caused a traffic crash

When you pass the driving skills test, you will be given a form with your test results. Before you drive, you must apply and obtain a license at a license office. The test result form itself is not valid for driving.

What Happens If You Fail The Behind-The-Wheel Driving Test?

If you fail the driving test, the examiner will suggest that you practice before retaking the test. You may take only one driving test per day.

If you fail the driving test three times, no further tests will be allowed without written authorization from the Department of Revenue. The driver examiner will give you a form that you must send to the department. After you send the form to the department, you will receive a letter from the department requiring additional behind-the-wheel driver training. You must send proof of the additional driver training before you will be allowed to take the driving test again.

Best Way To Prepare For Missouri Driving Test Behind-The-Wheel

When you are getting ready to take the behind-the-wheel drive test, the best way to prepare is by taking professional driving lessons and extensively practicing all the different maneuvers required during the test. The more prepared you are before the test, the more likely you are to pass.

If you are feeling nervous before your test, we do offer driving lessons throughout Missouri. Book now and get in one more lesson before heading to the DMV office! As always, if you have any questions or concerns, please reach out to our friendly support staff.

There is a lot of criteria the Missouri DOR tests during the behind-the-wheel drive test and we show that criteria here.

If you are heading out for the behind-the-wheel drive test in Missouri, find out what you will be tested on here.

What Do They Test During Behind-The-Wheel Driving Test In Missouri?

The time has come, as you have finished all your requirements and now you are ready to head to the Nevada DMV to take your driving test and get your drivers license. The driving test inspector for the Nevada Department of Motor Vehicles will conduct a pre-drive checklist before you begin your driving test. If you do not pass this, then you won't even get a chance to drive! Pass it with ease and make sure your car is ready to go using our pre-drive checklist below!

For the driving test in Nevada, the applicant must provide a vehicle in good condition for testing. The DMV examiner will inspect your vehicle before the test begins to make sure it is safe to drive. If your vehicle does not meet the requirements, you will need to reschedule your driving test.

To be fully prepared for your driving test the next day, you should familiarize yourself with the vehicle you will be driving during the road test. Make sure the vehicle is street legal and without any issues, which would include:

Making sure all the vehicle lights work, including the brake lights, head lights, reverse lights, hazards and turn signals

Familiarizing yourself with all the buttons, levers and instruments in the vehicle, such as the AC controls, turn signals, windshield wipers, headlight switch and emergency/parking brake.

Before you arrive at the Nevada DMV office for your road test, you should make sure that your windows and windshield are clean. These windows should also be free from any cracks. It is illegal to drive with a cracked windshield, so this would prevent you from taking the driver's test.

You will also need to check the tires on your vehicle. Cracked, low or excessively worn tires would be another reason the examiner can use for not allowing you to take the driving test. Make sure you have adequate air pressure and tread on the tires for the vehicle you are using.

When the road test is ready to begin, the DMV examiner that will be grading you will conduct their own vehicle inspection. If the vehicle is not up to legal standards or is deemed to be unsafe, you will be sent home before the test even begins.

While in the vehicle, make sure to adjust the side and rear view mirrors of the vehicle. This will show the examiner that you are a safe driver who always adjusts their mirrors before hitting the road.

If you pass the pre-drive checklist and your car is safe and ready to hit the road, then it is time to begin the actual driving test. We discuss what they test for the behind-the-wheel driving test in Nevada right here!

Before hitting the road for your driving test in Nevada, the DMV has a pre-drive checklist they test you on to locate and/or demonstrate how to use these driver safety items.

Better known as safety criteria, find out what items are tested on the pre-drive checklist by the Nevada DMV.

What Items Are On The Pre-Drive Checklist For Nevada Driving Test?

If you have finished all the requirements needed when applying for a driver's license in Nevada, then the final step before getting your Nevada driver's license would be to take (and pass) the behind-the-wheel driving test. We know you are nervous, as you want to pass it on the first attempt. The key to passing is being prepared, as this will help calm your nerves and help you remain calm and confident during your test. So, what do they test during the behind-the-wheel test in Nevada? We have the details below!

After making your appointment for your road test, you will want to make sure you have the current registration and proof of insurance for the vehicle you will be using for the test. You will need to present these at the DMV when you check in for your appointment. You will also need to make sure your vehicle meets all of the state requirements:

A windshield with no cracks or debris that would obstruct the view

Driver and passenger doors that open and close properly from inside and outside

Working lights: headlights, taillights, brake lights and turn signals, as well as a working horn and rearview mirror

Two red tail lamps in the rear that are visible from 500 feet

Rear stop lamps that display a red, amber, or yellow light

Turn signals located at the front and rear of vehicle

License plate to illuminate rear license plate

Self-operating windshield wipers capable of effectively clearing the windshield

When it comes to the driving portion of the test, you want to make sure to follow all the instructions the examiner gives you. You will be asked to perform a number of different maneuvers and drive in different areas of town, including business districts, residential districts, through intersections and more. The examiner will also take you through three school zones during the test to see how you react, whether you slow down or not.

For scoring, it is based on how you do within each section. Here are some of the maneuvers you may be asked to perform:

Reverse 2-point parking. Where you drive past the parking space and then back into the space.

Signal and turn: get into the proper lane and signal your turn for the last 200 feet. Right and left turns will be on your test. Even though they're basic, don't forget to practice these.

Passing other vehicles and changing lanes.

Stop quickly: be able to make a quick and safe stop when the examiner instructs you to at 20 mph.

During the road test, you want to make sure you are watching for bike lanes and pedestrians. You should also remember to check your mirrors, in addition, to actually turning and looking.

If you passed the test, you will go back to the DMV office and they will issue you a temporary license and the actual driver license will be mailed to you. If you failed, no need to worry. Not everyone passes on their first attempt. You can retake the exam until you pass, so you just need to schedule another appointment at least one day later and work on practicing those driving skills in the meantime. Keep in mind the examiner's feedback during the test and work on those points.

There is a lot of criteria the Nevada DMV tests during the behind-the-wheel drive test and we show that criteria here.

If you are heading out for the behind-the-wheel drive test in Nevada, find out what you will be tested on here.

What Do They Test During Behind-The-Wheel Driving Test In Nevada?

You are ready to head to the California DMV to take your driving test after completing all your requirements. It is time to get your driver's license! While some rumors state the DMV Driving Test Inspector will try to trick you into failing the test, we have stated that is not the case. Before the test begins, there will be a pre-drive checklist done by the inspector to make sure your vehicle is fit to be used for the behind-the-wheel test. Find out what is on that checklist by following along below!

You don't want to forget any documents needed at the DMV, so check out that list here. Since you will be completing your driving test while at the DMV, you will need to bring in proof of insurance and proof of registration for the vehicle you will be using for that driving test. Also, know where these documents are in the car in case you are asked to provide them during your test. You should make sure the tags and insurance are up-to-date on the vehicle, as well as the front plate is affixed and there is no blackout tint on the windows.

Once inside the vehicle, the DMV examiner will ask you to locate and/or demonstrate the vehicle and driver safety items listed below. If any items in the Pre-Drive Checklist (items 1-8 or 15-17) do not pass the criteria requirement on your vehicle, which is known as a "mechanical failure," you will need to reschedule your driving test.

While the DMV examiner is going through this checklist, if you cannot locate and/or demonstrate the operation of four or more items from Items 9-14, then your driving test will be marked as "unsatisfactory" (failure). If there is inclement weather present, you must be able to demonstrate that items 11-14 work properly or the driving test will be rescheduled.

According to the California DMV website, these are the requirements for each Pre-Drive Checklist item:

Driver Window: The driver-side window must be able to open. If it is closed, you will be asked to open the window.

Windshield: You and the examiner must have a full, unobstructed field of view provided by the windshield.

Rear-View Mirrors: The vehicle must have at least two mirrors. One of the mirrors must be located outside the vehicle on the left side. The second mirror can be located outside of the vehicle on the right side or inside the vehicle in the center. These mirrors must be secure, unbroken, and provide clear visibility.

Turn Signals: The right and left turn signals on both the front and back of the vehicle must be working.

Brake Lights: Both brake lights on the back of the vehicle must be working.

Tires: Each tire must have 1/32-inch tread depth in any two adjacent grooves. Also, the vehicle cannot have any bald tires.

Foot Brake: You must have at least one inch of clearance between the brake pedal and the floorboard when the pedal is pushed.

Horn: Your horn must be designed for the vehicle and in proper working condition. It must also be loud enough to hear from a distance of at least 200 feet. The horn cannot be a bicycle horn.

Emergency Brake (Parking Brake): You must be able to locate and demonstrate how to use the emergency brake (set and release).

Arm Signals: You must be able to show the DMV examiner arm signals for a left turn, right turn, slowing down, and stopping.

Windshield Wipers: You must be able to locate the windshield wiper switch and/or control wipers.

Defroster: You must be able to locate the front windshield defroster button.

Emergency Flasher (Hazard Lights): You have to correctly locate the emergency flasher switch/button if the warning vehicle is equipped with emergency flashers.

Headlights: You need to correctly locate the headlight switch.

Passenger Door: The door on the front passenger side must open and close properly.

Glove Box: The door to the glove box must securely close.

Seat Belts (Safety Belts): All vehicles that are designed with seat belts must have seat belts for both you and the driving test inspector. The seat belts must work properly and be used by the individuals in the car.

Getting ready to take the drive test at the DMV office? Make sure your vehicle is fit and ready for the test by following this checklist.

As you prepare to take the behind-the-wheel drive test at the DMV, make sure your vehicle is ready by following these steps.

How To Make Sure Your Vehicle Is Fit To Be Used For Behind-The-Wheel Drive Test

Every state is different with their requirements to complete when obtaining a driver's license. So, you may be asking: Can I get my license without taking the road test in Texas? Coastline Academy lets you know how to get a drivers license in Texas, so check it out below.

With most driver license-related information, it all depends on your age in the state of Texas. For any new driver under the age of 18, you would need to take the road test at the Texas DPS. You would also need to complete a Driver's Ed course and pass a written exam at the DPS office. The complete steps to earning your driver's license in Texas can be seen here.

For those new drivers that are over 18 but under 25 years old, they would have to complete a six-hour driver's education course. Once you have completed that course successfully, you can then schedule your driving test with the DPS.

For any new driver over the age of 25, you do not need to complete a drivers ed course. You would just need to make an appointment at the DPS to get a Texas learners permit.

At that appointment, you will take a written exam, as well as a vision and hearing test. If you pass everything, this is how to get a Texas drivers permit.

The permit allows you to practice your driving skills and take driving lessons before taking the behind-the-wheel road test at the DPS. Of course, if you feel confident in your driving, you can take the road test at the same appointment. If you pass, then you would be able to get your Texas driver license over 25.

Also, if you just moved to Texas and had a driver license in your previous state, all you would have to do is surrender your old license and apply for a new license in Texas. No written test or behind-the-wheel test is required!

If you are in need of taking the Texas drivers test, then you may be wondering how to go about scheduling it. The Texas DPS has certain requirements you must follow to ensure your visit is as fast and efficient as possible.

Once you have met all the requirements needed with how to get a license in Texas, it is time to schedule that appointment. You can do so online by clicking here.

Regardless of your age, distracted driving is a danger to people on the roadways. In Texas, there are certain cell phone laws to remember, per the Texas Department of Transportation:

You cannot send or receive electronic messages while driving in Texas.

Drivers with learner's permits are prohibited from using cellphones in the first six months of driving.

Using any handheld device in your vehicle in a school zone is illegal.

Drivers under the age of 18 are prohibited from using handheld devices.

School bus drivers may not use cellphones at all while driving if children are present.

Cell phone laws can change from city to city.

A lot of people ask if they can get their license without taking the road test in Texas and we take on that topic today!

Wanting to get your driver's license in Texas, but wondering if you need to take the road test? Find out here!

Can I Get My License Without Taking The Road Test In Texas?

You have completed all your requirements and now you are ready to head to the Ohio BMV to take your driving test and get your driver's license. The driving test inspector for the Ohio Bureau of Motor Vehicles will conduct a pre-drive checklist before you begin your Ohio driver test.

If you do not pass this, then you won't even get a chance to drive! Pass it with ease and make sure your car is ready to go using our driver test checklist below!

For the BMV drivers test Ohio, the applicant must provide a vehicle in good condition for testing. The BMV examiner will inspect your vehicle before the test begins to make sure it is safe to drive.

If your vehicle does not meet the requirements, you will need to reschedule your BMV driving test. Be familiar with your vehicle! The test administrator will you ask to demonstrate the following:

Turn on your windshield wipers, radio, defroster, headlights, heating and cooling systems

The following items will be checked on the drivers test car checklist to make sure they're in safe working condition:

If you meet all the car requirements for driving test Ohio and your car is safe and ready to hit the road, then it is time to begin the actual Ohio BMV drivers test. We discuss what they test for the behind-the-wheel driving test in Ohio right here!

If you hit all the marks on the Ohio road test score sheet and pass the driving test, then you will receive a probationary Ohio drivers license. With this in hand, you are allowed to drive without supervision. However, it comes with restrictions based on your age.

If you are 16 years old, those restrictions are:

You can't drive between 12 a.m. and 6 a.m. unless accompanied by a parent or guardian

You can't have more than one non-family passenger in the car unless accompanied by a parent or guardian

After holding the probationary license for 12 months and if you are under the age of 18, the following restrictions apply:

You can drive between those hours when accompanied by a parent or legal guardian or to and from work, and you must carry an Employer Approval for Probationary Driver License Holders Driving Within Restricted Hours (Form BMV 2825) with you. You can also drive to school or a church event with an Event Official Approval for Probationary Driver License Holders Driving Within Restricted Hours (Form BMV 2826).

To get a full, unrestricted Ohio drivers license, the final step would be to turn 18 years old. Once a driver turns 18 in Ohio, the probationary license converts to a full, unrestricted Ohio drivers license with just the rules of the road to follow.

As always, if you have any questions or concerns, please reach out to our friendly support staff. If you want to start your driver's training journey with Coastline Academy, make sure to sign up for Drivers Ed and book your driving lesson today.

Before hitting the road for your Ohio BMV drivers test, there is a drivers test checklist they test you on to locate and/or demonstrate how to use these driver safety items.

Better known as safety criteria, find out what items are tested on the driving checklist at the Ohio BMV driving test.

What Items Are On The Pre-Drive Checklist For Ohio Driving Test?

The final step before getting your driver's license is passing the behind-the-wheel driving test at the DMV office. You are feeling anxious, nervous and worried, which is completely normal. A stranger is going to come into your car and start critiquing your driving skills. Who wouldn't be nervous? While you want to pass with flying colors and get your driver's license, a good way to do that is avoid some of the top mistakes drivers make during the road test, which you can find below!

If you are taking your road test during the day, you might not think about needing to turn on your headlights. You may need to though, depending on the state you live. There are 14 states that require headlights in poor weather conditions and another 18 states that require them to be on when your windshield wipers are active. If it is a rainy/foggy/dreary day, make sure to turn on those headlights.

This seems like a pretty clear thing to avoid, but you never want to hit a person, animal or other vehicle. Not only is this during the driving test, but also any time you are driving! Keep in mind, this also includes hitting the curb while trying to park. If you do this in California, then you will automatically fail, as it is considered a critical driving error.

Not everyone on the road is inside your head. You need to let other drivers know what your intentions are, which is why using your turn signal is so crucial. You need to make sure you are consistently using them during the road test, as the evaluator is keeping track of this.

Speed limits are posted for a reason. For that location, the speed limit lets you know a safe traveling speed. While many drivers will try their best to stay below the speed limit during their road test, some might go too slow. Going too far under the speed limit can make you lose some points on the test, so try staying as close to that number as possible and always keep your eyes on the road for speed limit signs, as speed limits change often.

A mistake new drivers often make is forgetting to check their blind spots when pulling out into traffic or changing lanes. Not only is this a major safety issue, but evaluators will be looking for this during the driving test. During your practice time, make sure you are always looking over your shoulder when changing lanes. You never know when a vehicle might sneak up on you. Checking the blind spots can save a car crash from happening.

To help you avoid making any of these mistakes during the behind-the-wheel driving test, your best bet is to make sure you get a lot of practice before your test. The more time and experience you have driving, the more comfortable you will be during the test, so sign up for driving lessons with one of our instructors today!

Mistakes happen, but try to avoid making any of these mistakes during your behind-the-wheel driving test at your local DMV office.

While you want to not make any mistakes during the road test at the DMV, here are the top mistakes to try and avoid during your behind-the-wheel driving test.

Top Mistakes To Avoid During Behind-The-Wheel Driving Test

If you have met all the requirements, including finishing your Driver's Ed course, then the final step before getting your Ohio driver's license would be to take (and pass) the behind-the-wheel driving test. It's a nerve-wracking time, as you definitely want to pass it on your first attempt. Being prepared is key, as it will help you remain calm and confident during your test. So, what do they test during the behind-the-wheel test in Ohio? We have the details below!

Before the actual driving test begins, the applicant will need to present his or her temporary instruction permit identification card (TIPIC) and if they are under 18, then the applicant must also present a driver education certificate. The applicant must also provide a vehicle in good condition for the drive test. The examiner will perform a pre-drive checklist to make sure your vehicle complies with Ohio state laws. Some of the items that will be checked include:

Working lights: headlights, taillights, brake lights and turn signals

In addition to passing the pre-driving checklist, you will also need to provide proof of insurance and current registration before the actual driving test can begin. If everything looks good, it is time to begin the actual road test.

For the actual road test, it will be testing the applicant on two parts: driving and maneuverability. During the driving portion, the following will be performed (via the Ohio BMV website):

For the maneuverability portion of the test, it consists of two parts:

For this portion of the test, the applicant will be asked to perform the following tasks:

Drive forward through a 9’ by 20’ box formed by four markers. Measurements are taken from the center of the marker.

Examiner will direct driver to steer to the right or the left of the center marker.

Steer straight ahead and stop when the rear bumper of the car is even with the center marker and generally parallel with the course.

From a stopped position at the end of step one, driver must back past the center marker.

Straighten the car and back through the box, coming to a stop with the bumper even with the two rear markers and generally parallel with the course.

You have one final step to complete before finishing the test. Now the driver must remove the vehicle from the test area without running over markers or performing any other disqualifying actions. Stopping, bumping markers, misjudgment of stopping distance, and not being parallel with the test area are all deductions from the overall point total. It is an immediate failure if a driver runs over or knocks down a marker, or removes the marker from the designated area.

If you have passed all portions of the drive test, then you will need to go to a deputy registrar to be issued a driver license. At that time, you must surrender the TIPIC.

If you do not pass the drive test, you are allowed to retake it two times. You must wait seven days before doing a retake. If you fail the test three times, you will have to go through the whole licensing process again.

This is a stressful time for new drivers and parents, so go into it as prepared as possible by making sure to study this list often! As always, if you have any questions or concerns, please reach out to our friendly support staff. If you want to start your driver's training journey with Coastline Academy, make sure to sign up for Drivers Ed and book your driving lesson today.

There is a lot of criteria the Ohio BMV tests during the behind-the-wheel drive test and we show that criteria here.

If you are heading out for the behind-the-wheel drive test in Ohio, find out what you will be tested on here.

What Do They Test During Behind-The-Wheel Driving Test In Ohio?

Announcing Coastline Road Testing in Richmond

Road Test Options

Teen Road Test Requirements (16-17 years old)

Adult Road Test Requirements (18 years and older)

Testing in Your Own Vehicle?

About the Author

More Driving Test Articles